Description
- This battery can be used as starter battery for all outboard motors between 150 to 250hp and is fully compatible with Mercury and other leading brands
- IONIC exceeds any charging or cranking requirements actually needed to work with the Mercury 4 stroke up to 250hp. We have thousands of customers using them for cranking batteries since late 2019 with no issues
- 1,600 Cranking Amps*
- Battery Management Systems (BMS) with power terminal cut-off and recovery
- Built in cold weather protection – Does not take a charge if temperatures are below -4C or 24F in our case. Some variations with part tolerances.
- 70% lighter than lead acid batteries
- Two to four times the service life (3000-5000 cycles)
- Great for marine, RV, floor sweepers, lift gates, UPS systems, solar energy storage
- Cell balancing and low voltage/over voltage protection, short-circuit protection
- Bluetooth technology to monitor battery status
- Maximize your energy potential with 99% Depth of Discharge (DOD)
- Drop in replacements (plug and play)
- Run as many needed in parallel. Learn more
- Can go up to 4 in series with this battery
- Comes with an 11 Year Battery Warranty to give you peace of mind with your purchase.
- Compatible with the following chargers: Ionic, Noco Gen Pro, Dual Pro PS/ Auto, Minnkota Precision, Pro Mariner/Pro Tournament Elite, Stealth, Troll Bridge DC, Power Pole.
*Per Ionic Specifications
Magnuson-Moss Warranty Act: A vehicle manufacturer cannot legally void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)). Ionic Batteries have proprietary software embedded in the Battery Management Systems that make them 100% compatible with Mercury 250 hp motors and other leading brands. Learn More
| Model |
IC-12V150-EP |
| Voltage |
12V |
| Capacity |
150Ah, 1920Wh |
| Chemistry |
LiFePo |
| Weight |
33.1 lbs (15.0 kg) |
| Dimensions |
13.3 x 7.3 x 8.5″ 339 x 185 x 215 mm |
| Life Cycles |
3,000 @ 80% DOD |
| BMS |
Yes (Internal) |
| Recommended Charge Voltage |
14.2 V – 14.6 V |
| BMS Discharge Voltage Cut-Off |
10 V |
| Max Charge Current |
100 A@25°C |
| Max Continuous Discharge Current |
100 A@25°C |
| Cranking Amps |
1,600A* |
| Peak Discharge Current |
360A (5s) |
| Discharge Temperature |
-4 to 140°F (-20 to 60°) |
| BCI Group Size |
31 |
| Terminal |
Dual 3/8-16 Threaded UNC |
| Water Rating |
Water Resistant |
